Increasingly men and women are choosing to produce their very own pc networks and naturally this means wiring your own ethernet cable, plugs and sockets. It might be a challenging task but this stage by stage guide really should aid the DIY enthusiast build the foundations for a solid network. The advantages of going the do it your self route in regards to ethernet cable, or cabling is that you might have the choice to make custom ethernet cable lengths.
For instance, a twenty five foot long ethernet cable is hardly suitable when all you need is a two foot piece of wire. Follow these steps to wire your own network with ethernet cable.
The first step is to always get the end of the ethernet cable and cut it straight. Follow this by stripping the external casing about an inch from the end. If you want to make this step easier all you have to do is purchase an inexpensive ethernet cable stripper and then all you do is apply some pressure then simply rotate and pull.
When this step is finished, you should have 4 pairs of twisted ethernet cable if you are using Cat 5 cable.
The pairs of stripped ethernet cable will each have one solid color and the other will be striped. These colors are usually blue, green, orange and brown. At this point separate the pairs so you will have 8 separate wires total. You then should arrange the wires in to the correct pattern for insertion into the plug. By flexing the cables manually they will be easier to work with. You’ll find many wiring sequences utilized in Ethernet cable, in most cases diagrams of these may be simply found on the internet.
The plug for the ethernet cable is called an RJ45 connector. If the cables are not of equal length at this point it is usually worth making a straight cut across all of them. When you slide the wires of the ethernet cable into the RJ45 connector make sure they make contact with the copper posts.
Use a crimping tool, or the stripping tool if you have one, to apply pressure to the Ethernet cable and connector to make the connection permanent. This can be accomplished by holding the crimping tool with your dominant hand and the ethernet cable in the other. Repeat the crimping of the ethernet cable and connector several times to ensure good contact.
I hope this article at least gives you a starting point in setting up your own Ethernet cable computer network. By doing this yourself you will not only gain an understanding of you network but you will save money by not having to pay someone to do it for you.
If you want to find out more about ethernet cable, then visit Jason Wilson’s site on how to choose the best ethernet cable splitter for your needs.
|
|