None can be so irritating as a faucet dripping at night. It’s like a call saying that you are wasting your money. Make sure that you have your dripping faucets repaired as soon as possible. You can also repair it yourself if you know how. This page is helpful for learning how to fix dripping faucets.
First thing to do is to turn off the water supply to the faucet. Find the valve at the base of the faucet under the sink. One of the most common problem of faucets is the faucet washer. Make use of a screw driver to remove the top of the faucet stem. Just in case that you are unable to see any of the screws, try searching for it right near the center of the top under a piece of plastic or metal.
As soon as you have removed the handle you can use a slip joint pliers to remove the valve stem. The direction for removing it is the same direction when you are turning on your water. After removing it, you then examine the washer on the valve stem to see if it has already deteriorated. You then remove the screw holding the washer with a screwdriver and some penetrating oil. You will have to replace it if it gets bent or gouged.
You then need to inspect the valve seat for any signs of damage. If there are deformities or what looks like bite like imprints on the seat of the washer, then the washer on that will need to be replaced as well. It is found right at the bottom of the faucet and you need to utilize an allen wrench in order to remove it. Make sure that you do not damage the seat nor place it in too tightly into the faucet, so just place it in there slowly.
As soon as the seat is replaced you can already install a new washer on the valve stem. Then replace the stem into the faucet and replace the faucet handle as well. These are some simple step by step procedure on how to repair your leaking faucet.
If you want to call a plumber you can trust see us at San Diego plumbing. We can get if repaired today with our Pacific Beach plumbing office.
|
|